SENA UPSLink100 - Manual (Page 18)

18
3.2 UPS status
If there occurred any UPS alarms, the alarm records are shown on this page in red-colored font with
their detected time. The information about the current status and capability of Battery, Input, Output
and Bypass system is presented. When user logs into the UPS web page, this page first shows up and
refreshes itself every 30 seconds.
Figure 0-2 UPS status
3.3 UPS graphics – overall
A dedicated java applet communicates with UPSLink continuously through a separate TCP port (TCP
9009) so that the diagram representing the UPS status stays updated. Be noted that the alarms and
output source represented by text in the same page does not update themselves periodically.