SENA UPSLink100 - Manual (Page 27)

27
Figure 0-2 SNMP configuration
4.2.1 MIB-II system objects configuration
MIB– II System objects configuration sets the System Contact, Name, Location, and Authentication-
failure traps used by the SNMP agent of the UPSLink. These settings provide the values used for the
MIB-II sysName, sysContact, sysLocation and snmpEnableAuthenTraps Object Identifications (OIDs).
Brief descriptions of each OIDs are as follows,
sysContact: Identification of the contact person for the managed system (UPSLink), and a
description of how to contact the person.
sysName: Name used to identify the system. By convention, this is the fully qualified domain
name of the node.
sysLocation: The physical location of the system (e.g., Room 384, Operations Lab, etc.).
EnableAuthenTraps: Indicates whether the SNMP agent process is permitted to generate
authentication-failure traps
For more information about the MIBs and SNMP, see the RFCs 1066, 1067, 1098, 1317, 1318 and
1213.