SENA UPSLink100 - Manual (Page 41)

41
7.3 Language
The users of the UPSLink can switch language of the management web pages. Currently the UPSLink
supports two language sets, English and Korean. For the language set extension, please contact Sena
support.
Figure 0-6 Language selection
7.4 Date and time settings
Because there is no battery backup for the system clock in the UPSLink, the correct time is should be
specified on every boot time of the UPSLink to avoid losing the track of time.
There are two ways of doing this. The first is to use the NTP server to maintain the date and time
settings across rebooting. If the NTP feature is enabled, the UPSLink will obtain the date and time
information from the NTP server at each reboot. If the NTP server is set to 0.0.0.0, the UPSLink will
use the default NTP servers (UPSLink has its own NTS server table). In this case, the UPSLink should
be connected to the Internet so as to resolve the default NTS servers. The user may also need to set
the time offset from UTC depending on the user’s location. The second method is to set date and time
manually without using the NTP server. With manual setting, the date and time will be lost on power
off.
Figure 0-7 Date and time configuration