SENA Parani-SD1000U - Manual (Page 18)

Figure 3-5 Menu Bar at Upper Left corner of ParaniWIN
When the ParaniWin software is able to access the Parani-SD1000U properly, the icons in the left side
window come will become available for use.
In device configuration window, hardware reset can be executed or operation mode. Security option
also can be configured in this window.
Figure 3-6 Device Setting Window
Parani-SD1000U supports Authentication and Encryption. If you enable the Authentication option, you
must also enter a Pin Code value. If the authentication is enabled, the connection, between the Master
and Slave device must share the same Pin Code. In case that Parani-SD1000U connects to another
Bluetooth device, that requires authentication, you must know the other device‟s Pin Code. In general,
most Bluetooth devices have a pincode of 1234 or 0000. If you check Encryption option, the Parani-
SD1000U will encrypt packets and sent to the device. The Encryption options works well in case that
only one of the devices between Master and Slave use the Encryption option.