SENA Parani-SD1000U - Manual (Page 7)

1. Introduction
1.1. Overview
Parani-SD1000U is a usb adapter for wireless serial communication using Bluetooth 2.0+EDR
technology that is an international standard of short range wireless communications. Parani-SD1000U
can communicate with other Bluetooth devices; supports the Serial Port Profile.
The default working distance of Parani-SD1000U is 100m
Parani-SD1000U has a compact design, which allows it to be placed conveniently into various devices
or equipment. Its detachable antenna has the ability to optimize the quality and distance of wireless
communications.
Parani-SD1000U supports FHSS (Frequency Hopping Spread Spectrum), which is a technique, native
to Bluetooth that allows the Parani-SD1000U minimize radio interference while decreasing the
likelihood of over-air hijacking. Parani-SD1000U also supports authentication and data encryption.
Parani-SD1000U can be configured and controlled by a set of AT commands. Users can easily
configure Parani-SD1000U on a terminal program, such as HyperTerminal, and configure for wireless
communication without modifying user‟s existing serial communication program. User friendly
ParaniWIN can also be used for easy setup on Microsoft Windows.
1.2. Package Check List
Parani-SD1000U.
Stub Antenna.
Quick Start Guide.
CD-ROM including USB driver, User Guide and Data sheet.
1.3. Product Specification
Parani-SD1000U
Bluetooth Interface Bluetooth v2.0 + EDR
Profile: Serial Port Profile
Class 1
Working distance:
Stub Antenna - Stub Antenna 300 meters
Dipole Antenna (3 dBi) - Dipole Antenna (3 dBi) 400 meters
Dipole Antenna (5 dBi) - Dipole Antenna (5 dBi) 600 meters
Patch Antenna - Patch Antenna 1,000 meters
Configuration ParaniWIN, Modem AT command set
Firmware Update ParaniUpdater