SENA Parani-SD1000U - Manual (Page 20)

Figure 3-8 Signal Strength Test
The signal strength test shows LInkQuality and RSSI values. The closer LinkQuality is to 255 and
RSSI is to 0, this means the Parani-SD1000U has a good connection to the connected Bluetooth
device. In general, the wireless connectivity is at its best within 10 meters. You can push the STOP
button at anytime in order to terminate the signal strength test. The signal strength test will continue
until the STOP button is pushed. If you close the ParaniWIN Window without pushing the STOP button,
you must restart Parani-SD1000U to terminate the test.
Connection(in) icon will show the following window, which enables the Parani-SD1000U to wait for a
connection from another Bluetooth device. If the waiting time is set to 0, Parani-SD1000U will
continually wait for connection until [Cancel] button is clicked.