SENA Serial_IPTM Redirector 4.3 - Manual (Page 21)

2.1 Pre-installation Checklist
2.2 Configuring the Serial Server
2.3 Running the Serial/IP Setup Program
2.4 Selecting Serial/IP COM Ports
2.5 Configuring Serial/IP COM Ports in the Control Panel
2.6 Using the Serial/IP Configuration Wizard
2.7
Troubleshooting Installation Problems
2.6 Using the Serial/IP Configuration Wizard
The Configuration Wizard determines whether the Serial/IP Redirector can communicate with the serial server
using the following settings for a Serial/IP COM port:
●
IP Address of Server
●
TCP Port Number
●
Credentials
Additionally, the Configuration Wizard recommends values for the following settings:
●
Connection Protocol
●
COM Port Options
If the Configuration Wizard has completed successfully, you can accept its recommended settings by clicking the
Use Settings button. This is usually the fastest way to configure Serial/IP COM ports.
If the Configuration Wizard does not complete successfully, you must determine and fix the cause of the problem
before proceeding. If the Configuration Wizard is unable to work with your serial server, the Serial/IP COM ports
will not work when a PC application attempts to use it.
Activating the Configuration Wizard
2. Installing the Serial/IP Redirector