SENA Serial_IPTM Redirector 4.3 - Manual (Page 69)

Products: All redirectors except COM/IP.
Default setting: Enabled.
When enabled, the redirector uses the Nagle algorithm to coalesce small TCP/IP packets in the connection to the
server. This incurs a minor latency impact on the data stream, which is irrelevant to nearly all applications.
Include Domain in Windows Credentials
Products: All redirectors except COM/IP and DialOut/Client.
Default setting: Enabled.
When enabled, the current domain is pre-pended to the username sent as a result of "Use Windows Credentials".
Synchronize with Server Upon COM Port Open
Products: All redirectors except COM/IP.
Default setting: Enabled for the Serial/IP Redirector on Windows NT/2000/XP, disabled otherwise.
When enabled, the redirector defers the completion of COM port open until the server is ready to accept the data
stream.
If the Redirector is unable to fully set up the connection (e.g., the TCP connection fails or the Redirect is unable to
log in) then the application that opened the COM port will receive an error code from its attempt to open the COM
port.