SENA Serial_IPTM Redirector 4.3 - Manual (Page 73)

Appendix C. Configuration Wizard Messages
Status Panel
The following messages may appear in the Status panel:
Server connection failure.
The Wizard window here shows a simple communication problem. In this case, the Wizard
indicates that it cannot connect to the IP address and TCP port number set for this Serial/IP COM
port.
Normal progress messages.
When the Wizard's work proceeds normally, the messages summarize the interaction with the
server. These messages include:
●
Connected to Server
●
COM Port Control Support Detected
●
Telnet Protocol Detected
●
Server signature: <server name>
●
Session Completed
License mismatch messages.
If your license for Serial/IP is restricted for use with specific serial server hardware, Serial/IP will
issue the following message if the license does not match the server:
Client not licensed for this server
See the About box for more information about the Serial/IP license, or contact your
supplier for more information.
Communications error messages.
If the Wizard encounters a problem with the server, the Status panel will contain one of the
following messages:
●
Error connecting to <server IP address>
●
Error sending data.
If such errors appear:
Appendix