SENA Serial_IPTM Redirector 4.3 - Manual (Page 27)

3.1 Checking for Special Application Requirements
3.2 Modifying Application Settings
3.3
Troubleshooting Application Problems
3.4 Monitoring Serial/IP COM Port Activity
3.5 Tracing Serial/IP COM Port Data
3.2 Modifying Application Settings
For a PC application to use the Serial/IP Redirector and a serial server, its COM port settings must be changed to
use Serial/IP COM ports.
The general procedure is:
1. Find the "settings," or "preferences" or "options" command setting in the application that allows you to
specify the COM port to be used by the program.
2. Choose a Serial/IP COM port from the list.
Note: Some older Windows applications do not recognize COM ports higher than COM4. Some versions
of Windows HyperTerminal, for example, have this limitation. If you need to use such an application,
create Serial/IP COM ports in the COM 1-4 range.
3. Using the Serial/IP Redirector