GE Industrial Solutions EntelliGuard 3200–5000 A Frames, 240–600 Vac - Manual (Page 13)

EntelliGuard™ 3200–5000 Ampere Power Circuit Breakers
Chapter 2. Breaker Installation and Removal
5
NOTE: Placing the breaker directly on a
bench or floor will engage the spring discharge
mechanism. If maintenance or breaker opera-
tion is required with the breaker removed from
the compartment, the breaker must be raised
off the surface approximately 2 inches.
2.4 Testing the Breaker
The breaker can be operated without energizing the load
when it is in the TEST position. Using the Racking Handle
or Remote Racker, move the breaker from the CONN or
DISC position to the TEST position, as shown on the draw-
out position indicator. The breaker can now be operated
manually or electrically without energizing the load.
Note: The lockout feature will only function if the circuit
breaker is racked into the CONN position.