GE Industrial Solutions Entelliguard TU, MicroVersaTrip Plus and PM Conversion Kits - Manual

INTRODUCTION
GE Conversion Kits are designed for upgrading
existing Allis Chalmers®, Siemens/Allis®, and
Siemens®
low-voltage power circuit breakers, rather
than replacing the entire breaker. The Conversion Kits
include Entelliguard TU™, MicroVersaTrip Plus™ or
MicroVersaTrip PM™ Trip Units, the latest
technological advance in GE trip systems.
Entelliguard, MicroVersaTrip Plus and MicroVersaTrip
P Conversion Kits are designed and tested to conform
to ANSI Standard C37.59, allowing the retrofitter to
properly install the kit and acceptance test the
breaker.
This publication covers installation of Entelliguard,
MicroVersaTrip Plus and MicroVersaTrip PM
Conversion Kits on Allis Chalmers®, Siemens/Allis®,
and Siemens® LA-600, LA-800, LA-1600 Gold, RL-800,
RL-1600 and RL-2000 low-voltage power circuit
breakers. Each Conversion Kit contains all the
components needed to convert from the existing trip
system.
g
DEH40009
Installation Instructions
. R07
Entelliguard TU™, MicroVersaTrip
Plus™ and PM™ Conversion Kits
for Allis Chalmers ® , Siemens/Allis ® , and Siemens ®
LA-600, LA-800, LA-1600 Gold, RL-800, RL-
1600, and RL-2000 Low-Voltage Power Circuit
Breakers