GE Industrial Solutions POWER LEADER ModBus Monitor User Manual
Page 2
DEH–027
WARNINGS, CAUTIONS, AND NOTES
AS USED IN THIS PUBLICATION
WARNINGS
Warning notices are used in this publication to emphasize that hazardous voltages, currents, or
other conditions that could cause personal injury exist in this equipment or may be associated
with its use.
Warning notices are also used for situations in which inattention or lack of equipment
knowledge could cause either personal injury or damage to equipment.
CAUTIONS
Caution notices are used for situations in which equipment might be damaged if care is not
taken.
NOTES
Notes call attention to information that is especially significant to understanding and operating
the equipment.
This document is based on information available at the time of its publication. While efforts
have been made to ensure accuracy, the information contained herein does not cover all details
or variations in hardware and software, nor does it provide for every possible contingency in
connection with installation, operation, and maintenance. Features may be described herein that
are not present in all hardware and software systems. GE Industrial Systems assumes no
obligation of notice to holders of this document with respect to changes subsequently made.
GE Industrial Systems makes no representation or warranty, expressed, implied, or statutory,
with respect to, and assumes no responsibility for the accuracy, completeness, sufficiency, or
usefulness of the information contained herein. No warrantees of merchantability or fitness for
purpose shall apply.
REFERENCES
For details of the Modbus RTU protocol, refer to PI-MBUS-300 Rev. E from Modicon/AEG
Schneider Automation. For details of RS-485 communications, refer to the EIA-485 standard.
POWER LEADER™ is a trademark of General Electric Company.
Modbus RTU® is a registered trademark of AEG Schneider Automation.
Modbus® is a registered trademark of Modicon Inc.
Windows and Windows NT are registered trademarks of Microsoft Corporation.
© Copyright 1999 GE Company
All Rights Reserved