GE Industrial Solutions POWER LEADER ModBus Monitor - Manual (Page 36)

POWER LEADER Modbus Monitor
Chapter 4 – Operation
30
Using the up arrow or down arrow key, move the
selection bar until View is highlighted. Press ENTER to
select the View option, and the following menu appears:
'$7( 7,0( (9(17
/RRN DW D 'HYLFH
/RRN DW WKH /RFDO (YHQW /RJ
5HWXUQ WR WKH 0DLQ 0HQX
6WDWXV 2.
+(/3 (17(5 %$&.
Figure 37. Monitor View menu.
Option 1, Look At Device, allows you to view real-time
data being read from an individual device. Option 2,
Look at the Local Event Log, allows you to review
events which have been logged by the Monitor. These
options are discussed in greater detail below. The third
option returns to the main menu.
Look at a Device
To see the current data for individual devices, move the
selection bar to this item and press SELECT.
The Device Groups screen appears, similar to the sample
shown in Figure 38. (If no groups have been created, the
DEFAULT group is highlighted.)
'$7( 7,0( (9(17
*5283 1$0(
$VP /LQH 
$VP /LQH 
$VP /LQH 
3DLQW 5RRP
6WDWXV 2.
+(/3 (17(5 %$&.
Figure 38. Device Groups screen.
Scroll down to the desired device group and press
SELECT to view a list of devices in this group; a sample
screen is shown in Figure 39.
Notes on Password Protection
The Monitor’s Setup menu and Diagnostics menu can be protected from unauthorized access by activating the Monitor’s
password protection function. (There is no password protection for the basic viewing functions.) If Password Protection is
enabled, the user must enter the correct password when selecting either Setup or Diagnostics from the Main Menu. As well, if the
screen saver activates while the Monitor is in either Setup or Diagnostic modes, you will be required to re-enter the password to
resume functioning.
At the ENTER PASSWORD prompt, enter the password by entering four sequential digits, selecting each digit with the up/down
arrow keys and pressing select to move on to the next digit. Entering an incorrect password causes an error message to be
displayed and asks you to re-enter the password.
Forgotten the Password?
Should the password be forgotten or misplaced, contact a GE Resolution Engineer at 1-888-GE-RESOLV.