GE Industrial Solutions POWER LEADER ModBus Monitor - Manual (Page 63)

POWER LEADER Modbus Monitor
Appendix C – Register Data Formats
57
Format Description
Bit x (0-NO; 1-YES) The monitor will request one 16-bit register. The selected bit x will be tested for a 0 value or a 1 value. A bit value of
0 will display “No”. A bit value of 1 will display “Yes”. Bit x can range from 0-15, where Bit 0 is the LSB and Bit 15 is
the MSB.
Bit x (0-INACTIVE; 1-ACTIVE) The monitor will request one 16-bit register. The selected bit x will be tested for a 0 value or a 1 value. A bit value of
0 will display “Inactive”. A bit value of 1 will display “Active”. Bit x can range from 0-15, where Bit 0 is the LSB and Bit
15 is the MSB.
Bit x (0- 3-WIRE; 1- 4-WIRE) The monitor will request one 16-bit register. The selected bit x will be tested for a 0 value or a 1 value. A bit value of
0 will display “3-Wire”. A bit value of 1 will display “4-Wire”. Bit x can range from 0-15, where Bit 0 is the LSB and Bit
15 is the MSB.
Bit x (0- NOTRIP; 1- TRIP) The monitor will request one 16-bit register. The selected bit x will be tested for a 0 value or a 1 value. A bit value of
0 will display “No Trip”. A bit value of 1 will display “Trip”. Bit x can range from 0-15, where Bit 0 is the LSB and Bit 15
is the MSB.
Bit x (0- NO; 1- INPICKUP) The monitor will request one 16-bit register. The selected bit x will be tested for a 0 value or a 1 value. A bit value of
0 will display “No”. A bit value of 1 will display “Pickup”. Bit x can range from 0-15, where Bit 0 is the LSB and Bit 15
is the MSB.
Bit x (0- LATCHED; 1- PULSED) The monitor will request one 16-bit register. The selected bit x will be tested for a 0 value or a 1 value. A bit value of
0 will display “Latched”. A bit value of 1 will display “Pulsed”. Bit x can range from 0-15, where Bit 0 is the LSB and
Bit 15 is the MSB.
Bit x (0- PHASEOK; 1- PHASELOST) The monitor will request one 16-bit register. The selected bit x will be tested for a 0 value or a 1 value. A bit value of
0 will display “Phase OK”. A bit value of 1 will display “Phase Lost”. Bit x can range from 0-15, where Bit 0 is the LSB
and Bit 15 is the MSB.
Bit x (0- DEENERGIZE; 1-
ENERGIZED) The monitor will request one 16-bit register. The selected bit x will be tested for a 0 value or a 1 value. A bit value of
0 will display “Deenergize”. A bit value of 1 will display “Energized”. Bit x can range from 0-15, where Bit 0 is the LSB
and Bit 15 is the MSB.
Bit x (0- CHANGED; 1- NORMAL) The monitor will request one 16-bit register. The selected bit x will be tested for a 0 value or a 1 value. A bit value of
0 will display “Changed”. A bit value of 1 will display “Normal”. Bit x can range from 0-15, where Bit 0 is the LSB and
Bit 15 is the MSB.