GE Industrial Solutions HE300GEN251 - Manual (Page 20)

CH. 3: GEN250/251 COMM. 23 SEP 1999 PAGE 21
11. Choose a Word to configure by double-clicking on the desired word (or right-click on the word and
select Modify).
Figure 3.11
12. The following screen appears. Select a source and description using pull-down menus. Press OK.
Figure 3.12
I
For this example, the user is going to assign “high priority” to the Discrete Bit Word. Thus, the selected
source is Discrete Bit Word to Device. A description must be assigned as High Priority.
Note: Because the user made the selections shown on Figure 3.12 screen, one of the high priority words
is used up. This means that there are 5 words remaining that can be assigned as high priority.
(In Directed Data, there are 16 total words. Global Data has 32 possible words.)