GE Industrial Solutions HE300GEN251 - Manual (Page 46)

CH. 8: INSTALLATION 23 SEP 1999 PAGE 47
18. Reinstall terminal plugs that were previously disconnected in Step 5. (Figure 8.5.)
19. To reinstall the plate, remove the two knockouts covering the GEN250 connectors.
20. Secure the plate with two screws.
21. Install the supplied telephone cable between the regulation card and the GEN250.
22. Plug the supplied 2-Wire power cable into the connection J3 on the GEN250. (See Figure 8.3 for
J3’s location.)
Figure 8.5 – Installing GEN250
19
18
Remove knockouts for
GEN250’s connectors.
To Pin18
To Pin 19