GE Industrial Solutions HE300GEN251 User Manual
Page 24
Advertising
CH. 3: GEN250/251 COMM. 23 SEP 1999 PAGE 25
18. The following screen appears. Figure 3.19 screen depicts the status of Bit #1. In this example, the
parameter select for Bit #1 is Start/Stop.
Figure 3.19
If the user decides to remove a parameter from a bit, double-click on the bit (or right-click and press
Modify) and select No Description as depicted in Figure 3.20 and press OK.
Figure 3.20
19.
Put the cursor in front of the Expand/Collapse box in front of Discrete Bits (High Priority) and
click. Figure 3.21 appears.
Advertising