GE Industrial Solutions SG Series 225 & 300 Operating Manual - Manual (Page 28)

Modifications reserved Page 28/79
OPM_SGS_USM_M22_M30_2US_V010.doc User Manual SG Series 225 & 300 UL S2
6.3 ALARMS
The ALARMS mode is entered any time the “ALARM” button is pressed.
The LCD will display a series of screens corresponding to the last 255 events, two events per screen
(LEVEL 1
USER).
In this mode the buttons perform the following functions:
Return to HOME screen.
Scrolls backward to the previous screen.
Scrolls forward to the next screen.
U Move forward to the following event.
V Move back to the following previous event.
 Confirm the selection made.
It is possible to view any pushbutton functional description by pushing the button for more than 3
seconds.
The events displayed are the standard GE events as described in the Section 6.3.1 - EVENTS (Alarms
and Messages).
` Home\ Alarm
ALARM
LEVEL 1 : USER
LEVEL 2 : SERVICE
V 
Alarms screen
LEVEL 1 USER
Chronologically view 2 events per screenshot.
LEVEL 2 SERVICE
Chronologically view 5 events per screenshot with service
related info.
` Home\Alarm\User
NR = 255 05.18.2010 15.37.25
C = 4404 K6 CLOSING FAILURE
S = 00008180
NR = 254 05.15.2010 12.45.57
C = 4583 COMMAND TO SYNCHRONIZE
S = 00008180
U V
Screen of user alarms
NR Number chronologically assigned to an event (Nr.
255 is the more recent, Nr. 1 is the first).
Date and exact hour of the moment when the event
occurred.
C Number of standard GE code of the event and an
explicit text describing the event in the selected
languages.
S Status code of the UPS (information reserved for the
connectivity and the diagnostic).