GE Industrial Solutions LP 33 Series 30 & 40 kVA Installation Guide - Manual (Page 17)

Modifications reserved Page 17/41
OPM_LPS_3UI_30K_40K_0US_V010.doc Installation Guide LP 33 Series 10-20 kVA
Positioning of the UPS cabinet
LPS33U_
030-040_
UPS whe
els_01US
Dig it al E ne rgy TM
L P Serie s
To lower To lift
Fig. 3.4-5 Bolts for the regulation of the cabinet
LP 33 Series is equipped with wheels for
easy placement of the UPS.
To make the UPS movable on wheels, the
bolts on each leg of the cabinet have to be
turned counter-clockwise, until they are
free from the floor and thus the cabinet
supported on wheels.
After having positioned the UPS at its final
location, the cabinet has to be secured by
rotating the bolts on each leg clockwise,
but the wheels must still touch the floor.
In case of parallel system, try to place
the UPS modules in sequence of their
numbers (marked on the packing).
If the units are positioned “side by side”,
the side panels must be mounted on all
units.
Digital E ne rgy T M LP Se rie s
LPS33U_
030-040_ RPA disp osition_G
E_01
Digit al Ene r gy TM L P Series
Dig ital Ener g y TM
LP Series
Digital E n ergy T M L P Series
1
2
3
4
Fig. 3.4-6 RPA system disposition