GE Industrial Solutions BDCBB H569-445 - Manual (Page 15)

Secondary DC Power Distribution Bay H569-445
Issue 3 June 2012 15
Frame Ground
Frame ground connections are located on top of the cabinet. Connection is made using
either a 1/4 inch double-hole terminal lug on 0.625 inch centers or a 3/8 inch double-
hole terminal lug on 1 inch centers. Landings are provided on both the front and rear
rails of the cabinet. Hardware is factory installed for these connections. Local grounding
practices will determine the grounding method and size of cable connected to the
cabinet.
Figure 6 Top View of 26-inch Wide Cabinet