2 network classes, Network classes – Asus GigaX2024X User Manual

Page 103

Advertising
background image

GigaX Series L2 Managed Switch User Guide

103

6.1.2 Network

classes

The three commonly used network classes are A, B, and C. (There is also a
class D but it has a special use beyond the scope of this discussion.) These
classes have different uses and characteristics.

Class A networks are the Internet's largest networks, each with room for over
16 million hosts. Up to 126 of these huge networks can exist, for a total of over
2 billion hosts. Because of their huge size, these networks are used for WANs
and by organizations at the infrastructure level of the Internet, e.g. your ISP.

Class B networks are smaller but still quite large, each being able to hold over
65,000 hosts. There can be up to 16,384 class B networks in existence. A
class B network might be appropriate for a large organization such as a
business or government agency.

Class C networks are the smallest, only able to hold 254 hosts at most, but the
total possible number of class C networks exceeds 2 million (2,097,152 to be
exact). LANs connected to the Internet are usually class C networks.

Some important notes regarding IP addresses:

The class can be determined easily from field1:

field1 = 1-126:

Class A

field1 = 128-191: Class B
field1 = 192-223: Class C

(field1 values not shown are reserved for special uses)

A host ID can have any value except all fields set to 0 or all fields set to 255, as
those values are reserved for special uses.

Advertising