Reload, Mirror mode] [enable/disable, Monitor port] [port number – Asus GigaX2024X User Manual
Page 83: Show multicast group
GigaX Series L2 Managed Switch User Guide
83
CLI command : l2 port lacppri <priority> <port list / * for all ports>
[Reload]
Restores the previous saved settings of trunk from configuration file.
CLI command : l2 trunk retrieve
[Mirror Mode] [Enable/Disable]
[Monitor Port] [port number]
Displays the mirroring settings of the switch.
CLI command : l2 mirror create <monitor port no> <enable/disable>
CLI command : l2 mirror ingress <port list>
CLI command : l2 mirror egress <port list>
CLI command : l2 mirror remove <ingress/egress> <port list>
[Reload]
Restores the previous saved settings from configuration file.
CLI command : l2 mirror retrieve
[Show Multicast Group]
Displays the static multicast groups that are presented in the multicast
group table.
CLI command: l2 mcast show
[Set Multicast Group]
Allows user to add or modify a static multicast group by specifying the MAC
address, VLAN ID, , VLAN port members, and its untagged port members.
Note that MAC address and VLAN ID combination is formed as an unique
entry in multicast group table
CLI command: l2 mcast set
mac address [format: xx:xx:xx:xx:xx:xx]: <multicast mac address>