Reload, 5 security commands, Reauthentication – Asus GigaX2024X User Manual
Page 95: Reauthentication time, Authentication method, Quiet period, Security commands
GigaX Series L2 Managed Switch User Guide
95
AuthPassword: (old auth password string) < new auth password string>
Priv Protocol [oid]: (old priv protocol oid string) < new priv protocol oid
string >
Priv Password: (old priv password string) < new priv password string >
Allows user to delete a USM User entry.
CLI command : snmp snmpv3 usmuser delete
USM user entry: <entry id to delete>
[Reload]
Restores the previous saved settings from configuration file.
CLI command : snmp snmpv3 usmuser retrieve
5.3.5
Security
Commands
[Reauthentication]
Allows user to open or close periodic reauthentication.
CLI command : security dot1x bridge reauth <enable / disable>
[Reauthentication Time]
Allows user to set up the reauthentication time.
CLI command : security dot1x bridge reauthtime <reauthentication time
(1-4294967295 sec)>
[Authentication Method]
Allows user to set up the authentication method (RADIUS or Local database).
CLI command : security dot1x bridge authmeth <type (1:local 2:radius)>
[Quiet Period]
Allows user to set up the quiet period.