Asus GigaX2024X - Manual (Page 66)

GigaX Series L2 Managed Switch User’s Guide
4.7.3 RADIUS
In order to use external RADIUS server, the following parameters are
required to be setup:
• Authentication Server IP: The IP address of the RADIUS server.
• Authentication
Server Port: The port number for the RADIUS server is
listening to.
• Authentication Server Key: The key is used for communications between
GigaX and the RADIUS server.
• Confirm Authentication Key: Re-type the key entered above.
•
The VLAN of the RADIUS server connected to the switch must be
the same as the VLAN of the system management interface.
•
Please click to make the settings permanent. Click to
refresh the settings to current value.
Figure 37. RADIUS
66