Asus Terminator A7VT - Manual (Page 15)

ASUS Terminator 1 A7VT barebone system 15
8. Microphone port. This Microphone (pink) port connects a
microphone. In 4/6-channel mode, the function of this port becomes
Surround Speaker.
Setting the switch to 115V in a 230V environment will seriously damage
the system!
Voltage Selector
The switching power supply that came with the system has a voltage
selector switch below the power socket. Use this switch to select the
appropriate voltage according to the voltage supply in your area.
If the voltage supply in your area is 100-127V, set the switch to 115V.
If the voltage supply in your area is 200-240V, set the switch to 230V.
Audio ports function variation
Port Headphone/2-Channel 4-Channel 6-Channel
Light Blue Line In Line In LFE Output*/Center
Lime Line Out Front Speaker Out Front Speaker Out
Pink Mic In Surround Surround
* LFE Output: Low Frequency Enhanced Output
Windows ® 98 SE only supports 4.1-channel speaker setting.
The functions of the Line Out (lime), Line In (blue), and Mic (pink) ports
on the rear panel change when you select the 4-channel or 6-channel
audio configuration as shown in the following table.
9. LAN (RJ-45) port. This port allows connection to a Local Area
Network (LAN) through a network hub.
10. USB 2.0 ports. These Universal Serial Bus 2.0 (USB 2.0) ports are
available for connecting USB 2.0 devices such as a mouse, printer,
scanner, camera, PDA, and others.
11. Parallel port. This 25-pin port connects a printer, scanner, or other
devices.
12. Power socket. This socket connects the power cable and plug.
13. Voltage selector. This switch allows you to select the appropriate
voltage supply in your area.