Asus Terminator A7VT - Manual (Page 60)

60 Chapter 4: Motherboard information
4. ATX power connectors (20-pin ATXPWR, 4-pin ATX +12V)
These connectors are for ATX power supply plugs. The plugs from
the power supply are designed to fit these connectors in only one
orientation. Find the proper orientation and push down firmly until the
connectors completely fit.
Make sure to connect the 4-pin ATX +12V power plug; otherwise, the
system does not boot up.
A7VT
®
A7VT ATX power connectors
+3.3Volts
-12.0Volts
Ground
Power Supply On
Ground
Ground
Ground
-5.0 Volts
+5.0 Volts
+5.0 Volts
Power Good
+12.0Volts
+3.3 Volts
+3.3 Volts
Ground
+5.0 Volts
Ground
+5.0 Volts
Ground
+5V Standby
ATX12V
ATXPWR
+12V DC COM
+12V DC COM
5. Front panel audio connector (5-1 pin MIC_LOUT)
This connector is for a chassis-mounted front panel audio I/O module
that supports legacy AC’97 audio standard.
A7VT
®
A7VT Front panel audio connector
MIC_LOUT
1
MIC Signal MIC PWR
Head set Left channel
GND Head set Right channel
1