Asus Terminator A7VT - Manual (Page 95)

ASUS Terminator 1 A7VT barebone system 95
Supervisor Password [Clear]
User Password [Clear]
These fields allow you to set passwords.
To set a password:
1. Highlight an item then press <Enter>.
2. Type in a password using eight (8) alphanumeric characters, then
press <Enter>.
3. When prompted, confirm the password by typing the exact characters
again, then press <Enter>. The password field setting is changed to
[Set].
To clear the password:
1. Highlight the password field, and press <Enter> twice. The following
message appears:
“PASSWORD DISABLED!!! Press any key to continue...”
2. Press any key to return to the menu.
A note about passwords
The Supervisor password is required to enter the BIOS Setup
program preventing unauthorized access. The User password is
required to boot the system preventing unauthorized use.
5.6.6 Security
Security
Supervisor Password Clear
User Password Clear
Password Check [Setup]
Item Specific Help
Supervisor password
controls full
access, <Enter> to
change password.
Select Menu