Asus Terminator A7VT - Manual (Page 19)

ASUS Terminator 1 A7VT barebone system 19
2.3 Removing the cover
The chassis cover is secured by a screw located on the rear panel.
Follow these steps to remove the
chassis cover.
1. Turn the screw
counterclockwise to release
the cover. Set the screw
aside.
2. Place your hands on both
corners of the front panel, just
beside the CD-ROM frame.
Push on the CD-ROM area
with your thumbs until the
cover tilts forward.
3. While supporting the front
panel with one hand, place
your other hand on the top
rear edge of the cover and
carefully lift the cover from the
chassis.
Screw
TIP
Another way to release the cover is
to place your hands underneath the
front panel edge, then push the inner
chassis with your thumbs while
pulling the panel with your other
fingers.