Asus Terminator A7VT - Manual (Page 27)

ASUS Terminator 1 A7VT barebone system 27
Follow these steps to install a DDR
DIMM.
1. Locate the two DIMM sockets
on the motherboard.
2. Unlock a socket by pressing
the retaining clips outward.
3. Align a DIMM on the socket
such that the notch on the
DIMM matches the break on
the socket.
4. Firmly insert the DIMM into the
socket until the retaining clips
snap back in place and the
DIMM is properly seated.
A DDR DIMM is keyed with a notch so that it fits in only one direction.
DO NOT force a DIMM into a socket to avoid damaging the DIMM.
Socket break
DIMM notch
DDR DIMM sockets
2.7.2 DIMM installation