Asus Vintage - Manual (Page 56)

56 Chapter 4: Motherboard information
• Power/Soft-off button (2-pin PWR_BTN)
This connector is for the system power button. Pressing the power
button turns the system ON or puts the system in SLEEP or SOFT-
OFF mode depending on the BIOS settings. Pressing the power
switch for more than four seconds while the system is ON turns the
system OFF.
• Hard disk drive activity (2-pin IDE_LED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD
Activity LED cable to this connector. The IDE LED lights up or flashes
when data is read from or written to the HDD.
• Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for
system reboot without turning off the system power.