Asus Vintage - Manual (Page 76)

76
5.5 Power menu
The Power menu items allow you to change the power settings. Select an item
then press <Enter> to display the configuration options.
5.5.1 ACPI Aware O/S
Enables or disable ACPI support for the operating system. Configuration
options: [Yes] [No]
5.5.2 Suspend Mode [Auto]
Allows you to select the ACPI state to be used for system suspend.
Configuration options: [S1 (POS) only] [S3 Only] [Auto]
5.5.3 Repost Video on S3 Resume [No]
Determines whether to invoke VGA BIOS POST on S3/STR resume.
Configuration options: [No] [Yes]
ACPI Aware O/S [Yes]
Suspend Mode [Auto]
Repost Video on S3 Resume [No]
ACPI APIC Support [Enabled]
APM Configuration
Hardware Monitor
Enable/Disable ACPI
support for Operating
System.
ENABLE: If OS supports
ACPI.
DISABLE: If OS does
not support ACPI
USB 2.0 Controller Mode [HiSpeed]
Allows you to configure the USB 2.0 controller in HiSpeed (480 Mbps) or
Full Speed (12 Mbps). Configuration options: [HiSpeed ] [Full Speed]
Stop EHCI HC in OHCI handover [Enabled]
When set to [Enabled], the BIOS stops the EHCI host controller during
OHCI OS handover call. This is needed for installing operating systems
that do not support EHCI host controllers.