2 boot settings configuration, Quick boot [enabled, Addon rom display mode [force bios – Asus Vintage User Manual
Page 81: Bootup num-lock [on, Ps/2 mouse support [auto, Wait for ‘f1’ if error [enabled, Hit ‘del’ message display [enabled, Interrupt 19 capture [disabled
81
ASUS Vintage-S800 barebone system
5.6.2 Boot Settings Configuration
Quick Boot [Enabled]
Enabling this item allows BIOS to skip some power on self tests (POST)
while booting to decrease the time needed to boot the system. When set
to [Disabled], BIOS performs all the POST items.
Configuration options: [Enabled] [Disabled]
AddOn ROM Display Mode [Force BIOS]
Sets the display mode for option ROM.
Configuration options: [Force BIOS] [Keep Current]
Bootup Num-Lock [On]
Allows you to select the power-on state for the NumLock.
Configuration options: [On] [Off]
PS/2 Mouse Support [Auto]
Allows you to enable or disable support for PS/2 mouse.
Configuration options: [Auto] [Disabled] [Enabled]
Wait for ‘F1’ If Error [Enabled]
When set to [Enabled], the system waits for F1 key to be pressed when
error occurs. Configuration options: [Enabled] [Disabled]
Hit ‘DEL’ Message Display [Enabled]
When set to [Enabled], the system displays the message “Press DEL to
run Setup” during POST. Configuration options: [Enabled] [Disabled]
Interrupt 19 Capture [Disabled]
When set to [Enabled], this function allows the option ROMs to trap
Interrupt 19. This is required by some PCI cards that provide a ROM-
based setup utility. Configuration options: [Disabled] [Enabled]
Boot Settings Configuration
Quick Boot
[Enabled]
AddOn ROM Display Mode
[Force BIOS]
Bootup Num-Lock
[On]
PS/2 Mouse Support
[Auto]
Wait for ‘F1’ If Error
[Enabled]
Hit ‘DEL’ Message Display
[Enabled]
Interrupt 19 Capture
[Disabled]
Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.