Asus Terminator Tualatin - Manual (Page 100)

100 Chapter 5: BIOS Information
PWR Up On External Modem Act [Disabled]
This allows either settings of [Enabled] or [Disabled] for powering up
the computer when the external modem receives a call while the
computer is in Soft-off mode. NOTE: The computer cannot receive
or transmit data until the computer and applications are fully running.
Thus connection cannot be made on the first try. Turning an external
modem off and then back on while the computer is off causes an
initialization string that will also cause the system to power on.
Configuration options: [Disabled] [Enabled]
Wake On LAN or PCI Modem [Disabled]
Wake-On-LAN/PCI Modem allows your computer to be booted from
another computer via a network by sending a wake-up frame or signal.
Configuration options: [Disabled] [Enabled]
Wake Up By PS2 Keyboard [Space Bar]
When the previous setup item Wake On PS2 KB/PS2 Mouse/CIR is
enabled, you may specify the key(s) to press to power up the
computer. Configuration options: [Space Bar] [Ctrl-Esc] [Power Key]
[Wakeup Key]
Wake On USB for STR State [Disabled]
This field allows you to use your USB device/s, if any, to power up
the computer from Suspend-to-RAM mode. This feature requires an
ATX power supply that can supply at least 2A on the +5VSB lead.
The default is set to [Disabled] because not all computers have the
appropriate ATX power supply. Your computer will not power on if
you set this to [Enabled] and do not have the appropriate ATX power
supply. NOTE: This feature must be set in conjunction with USB
Device Wake Up in 3.4 Motherboard Settings. Configuration
options: [Disabled] [Enabled]
Automatic Power Up [Disabled]
This allows an unattended or automatic system power up. You may
configure your system to power up at a certain time of the day by
selecting [Everyday] or at a certain time and day by selecting [By
Date]. Automatic Power Up does not work if the system is powered
down by operating systems with ACPI feature, such as Windows 98.
Configuration options: [Disabled] [Everyday] [By Date]
IMPORTANT:
This feature requires an optional network interface with Wake-On-
LAN and an ATX power supply with at least 720mA +5V standby power.