Asus Terminator Tualatin - Manual (Page 87)

ASUS Terminator Barebone System 87
5.4 Advanced Menu
CPU Internal Frequency
In JumperFree™Mode, this field allows you to select the internal
frequency of your CPU. Select [Manual] if you want to make changes
to the subsequent 2 fields. Note that selecting a frequency higher
than the CPU manufacturer recommends may cause the system to
hang or crash.
CPU Frequency Multiple
This field is for unlocked processors only. If your processor Frequency
Multiple is detected locked, you will not be able to access this field.
This field sets the frequency multiple between the CPU internal
frequency and external frequency. In JumperFree™Mode, when CPU
Internal Frequency is set to [Manual], this must be set in conjunction
with FSB/SDRAM Frequency (MHz) to match the internal frequency
of your CPU. Configuration options vary according to the external
frequency of your CPU.
CPU Level 1 Cache, CPU Level 2 Cache [Enabled]
These fields allow you to choose from the default of [Enabled] or
choose [Disabled] to turn on or off the CPU’s Level 1 and Level 2
built-in cache. Configuration options: [Disabled] [Enabled]
CPU Level 2 Cache ECC Check [Disabled]
This function controls the ECC capability in the CPU level 2 cache.
Configuration options: [Disabled] [Enabled]