Asus Terminator Tualatin - Manual (Page 91)

ASUS Terminator Barebone System 91
[A-Video PAL Underscan TV only]
[A-Video NTSC Underscan TV only]
[CRT1+S-Video PAL Underscan TV]
[CRT1+S-Video NTSC Underscan TV]
[S-Video PAL Underscan TV only]
[S-Video NTSC Underscan TV only]
[CRT1+SCART]
[SCART only]
[CRT1+Hi-TV]
[Hi-TV only]
PCI 2.1 Support [Enabled]
This parameter allows you to enable or disable the PCI 2.1 features
that include passive release and delayed transaction. Configuration
options: [Disabled] [Enabled]
ISA Bus Clock [PCICLK/4]
This parameter allows you to set the ISA bus clock frequency. The
default setting [PCICLK/4] sets the ISA bus at a quarter speed of the
PCI bus. Configuration options: [PCICLK/4] [7.159MHz]
Onboard PCI IDE Enable [Both]
This parameter allows you to enable either the primary IDE channel or
the secondary IDE channel, or both. You may also set both channels to
[Disabled]. Configuration options: [Both] [Primary] [Secondary] [Disabled]
USB Function [Enabled]
Set this field to [Enabled] if you want to use the Universal Serial Bus
devices. Configuration options: [Enabled] [Disabled]
Onboard LAN [Enabled]
Configuration options: [Enabled] [Disabled]
Onboard LAN Boot ROM [Enabled]
Configuration options: [Enabled] [Disabled]
NOTE
The TUSC motherboard does not support the LCD & TV Out function.
The default setting should not be changed.