2 detach the drive frame – Asus Terminator Tualatin User Manual
Page 17
Advertising
ASUS Terminator Barebone System
17
2.2 Detach the Drive Frame
IMPORTANT
Before detaching the drive frame, you must first remove the power
socket module from the rear panel.
2. Remove the screw (located
on the rear panel frame) that
secures the power socket
module.
Follow these steps to detach the
drive frame.
1. Place the chassis on a flat
surface and turn it on its side.
Notice that the power socket
and voltage selector switch
are attached to a metal
module, which is secured to
the rear panel.
Power Socket and Voltage Selector Switch
Module
screw
Power Socket
Module
WARNING!
Do not plug in the main power cable into the power socket until
you have completed the system installation.
Advertising