Asus Terminator Tualatin - Manual (Page 90)

90 Chapter 5: BIOS Information
Refresh RAS Assertion [5T]
Configuration options: [6] [7] [5] [4]
Refresh Queue Depth [12]
Configuration options: [0] [4] [8] [12]
SDRAM Refresh Mode [Staggered One Clock Apart]
Configuration options: [Simultaneous] [Staggered One Clock Apart]
Memory Post Write Control [Enabled]
Configuration options: [Enabled] [Disabled]
Memory Hole At Address [None]
This parameter allows you to reserve an address space for ISA
expansion cards. Configuration options: [None] [Enabled]
CPU to VGA Memory Post Write [Enabled]
Configuration options: [Enabled] [Disabled]
Video Memory Cache Mode [USWC]
USWC (uncacheable, speculative write combining) is a new cache
technology for the video memory of the processor. It can greatly
improve the display speed by caching the display data. You must set
this to UC (uncacheable) if your display card does not support this
feature, otherwise the system may not boot. Configuration options:
[UC] [USWC]
Graphics Aperture Size [64MB]
This feature allows you to select the size of mapped memory for
AGP graphic data. Configuration options: [4MB] [8MB] [16MB] [32MB]
[64MB] [128MB] [256MB] [512]
VGA Shared Memory Size [8MB]
This parameter allows you to select the size of system memory to
allocate for the video memory. Configuration options: [8MB] [16MB]
[32MB] [64MB] [Disabled]
VGA LCD TV Display Type [Auto (BIOS Default)]
This parameter allows you to select the display type from the
supported options. Configuration options:
[Auto (BIOS Default)]
[CRT1 only]
[CRT1+LCD with Scaling]
[LCD with Scaling only]
[CRT1+A-Video PAL Underscan TV]
[CRT1+A-Video NTSC Underscan TV]