Xylem ProLab 4000 - Manual (Page 150)

Conductivity ProLab 4000
150 ba75646d03 12/2012
10.2.8 Selecting and determining the nonlinear temperature
compensation TC nLin2
1 Highlight the channel of the conductivity measuring cell in the
measured value display.
2 If necessary, select the measured parameter with <MODE>.
3 Immerse the measuring cell in the test sample.
4 Open the input window for the measurement of the tempera-
ture dependency with Calibration / TC calibration / TC nLin2.
5 Enter the start temperature, end temperature, temperature
interval and reference temperature and confirm with [Con-
tinue].
The display shows:
 the current conductivity value
 the current temperature
 information on the nominal temperature of the next measur-
ing point and the temperature difference between the cur-
rent temperature and the nominal temperature