Extron Electronics Dante Controller - Manual (Page 27)

Dante Controller User Guide
Copyright © 2013 Audinate Pty Ltd. All rights reserved. -27-
same time (see the figure in Expanding the Routing View ).
Unsubscribing Audio Channels
To unsubscribe an audio channel, click on the cross-point containing a subscription. The subscription icon
will be removed and revert to a plain blue square.
Subscription Status
The symbol displayed at the intersection of the Tx channel and the Rx channel in the Routing View
provides information on the status of the subscription or connection, as follows:
In progress The subscription is in progress
Subscribed Connection is established and fully functional
Warning Indicates that the subscription is unresolved, typically because the
transmitting device is not visible on the network (for example
because it has been removed or turned off)
Error An error has occurred, for example there is insufficient bandwidth to
establish the subscription
Pending Device is part-way through setting up subscription. Most commonly
seen when subscribing many devices at a time (by Ctrl-click)
Note: The status of a subscription can change after it has been initially established, due to changes
in the network or changes in other devices.
Device Status View
The Device Status view can be displayed by clicking on the Device Status tab within the Network View
window.
The Device Status view presents a network wide overview of device configuration and operating
information. The tabular view presents the following information, in columns from the left, as follows: