Extron Electronics Dante Controller - Manual (Page 37)

Dante Controller User Guide
Copyright © 2013 Audinate Pty Ltd. All rights reserved. -37-
The Transmit Tab is arranged in two areas:
n
Transmit Channels: The area on the left pane of the tab shows the Tx channels for the device, and
any user-defined channel label. It allows the user to create labels for transmit channels. Input to the
table is filtered to prevent illegal characters from being used in channel labels.
Supported devices will also show the following channel metering icons in the Signal column,
indicating the presence of audio on subscribed channels:
Channel is either muted, or receiving audio at less than -61dbFS
Channel is receiving audio between -61dbFS and 0dfFS
Channel is clipping
n
Transmit Flows: The area on the right pane of the tab indicates how many unicast flows are
currently in use, as well as the multicast transmit flows that have been configured on the device.
Multicast flows are listed in ID order, including the channels contained within the flow.
Note: Unicast flow details are not displayed in the transmit flow window. The total number of
transmit flows currently in use is shown at the top of the pane. The total number of flows is the sum of
the unicast and multicast flows in use. The maximum number of flows that the device supports is
also shown (16 in the screenshot above).