Extron Electronics Dante Controller - Manual (Page 9)

Dante Controller User Guide
Copyright © 2013 Audinate Pty Ltd. All rights reserved. -9-
Introduction
About Dante Controller
Dante Controller is a software application provided by Audinate which allows
users to configure and route audio around Dante networks. It is available for PCs
running Windows 7 and Windows 8, and Apple Macs running OS X 10.6.8, 10.7.5
and 10.8.
Once you install Dante Controller on your PC or Mac and connect it to a Dante
network, you can use Dante Controller to:
n
View all Dante-enabled audio devices and their channels on the network
n
View Dante-enabled device clock and network settings
n
Route audio on these devices, and view the state of existing audio routes
n
Change the labels of audio channels from numbers to names that suit you
n
Customize the receive latency (latency before play out)
n
Save audio routing presets
n
Apply previously saved presets
n
View and set per device configuration options including:
o Changing the device name
o Changing sample rate and clock settings
o Viewing detailed network information
o Access the device web page to upgrade firmware and license information (where supported)
o Identify a device for example by flashing LEDs (where supported)
What's New in version 3.4
v3.4.0
n
Metering icons are displayed for supported devices.
n
The Multicast Bandwidth for the network is displayed on the menu bar.
n
The event log icons have been updated.
n
Subscription in progress icons are now displayed when new subscriptions are made.
n
Clock Health Monitoring - displays a notification if a device clock is showing signs of instability.
n
Clear Config replaces Factory Reset for supported devices.
n
Mute Status has been added to the Device view > Status tab.
n
The Apple Bonjour service is no longer used for device discovery by Dante Controller for Windows -
the Audinate 'Dante Discovery' service is now used instead. Dante Discovery is installed
automatically with Dante Controller v3.4.0 for Windows.
Note: If you have Dante Firmware Update Manager or Dante Virtual Soundcard, do not uninstall
Bonjour from your system - it is still required by those applications.