Extron Electronics MLC 206 AAP EC User Guide - Manual (Page 43)

4-11 MediaLink Controllers • Serial Communication
Switcher (MLS) Config
The Switcher (MLS) Config screen, shown below, only becomes available if an
optional MediaLink Switcher is connected to the MLC. It allows you to make
switcher-specific adjustments without having to use the switcher’s front panel
controls.
In this part of the program you can:
• Set per-input audio adjustments (level, bass, treble).
• Set overall volume. (Selecting Mute selects audio input 0.)
• Set the left-right audio balance.
• Set the mixer volume (MLS 506MA & MLS 506SA only).
• Choose between stereo and mono output for the variable preamp output.
• Tell the switcher whether a 4 ohm or an 8 ohm (the total resistance of the
connected speakers) load is connected to the amplified output.
• Set the video format (composite video/S-video, or component video) for inputs
1 through 3 (MLS 506MA & MLS 506SA only).
• Set the RGB delay period (for Triple-Action Switching).
• Reset the switcher to factory default settings. This resets all switcher settings and
options.
Not all of the features shown above will appear for every model of MLS
switcher.