Extron Electronics System 5 IP Series Setup Guide - Manual (Page 22)

System 5 IP Switchers • Software Setup
System 5 IP Software Setup, cont’d
3-14 System 5 IP Switchers • Software Setup 3-15
3 . Click the Add Driver button. The Hitachi DVD/VCR
appears within the Selected Driver(s) field.
Notice that this action also populates the IR Driver
Function(s) field with predefined functions.
To view these IR driver functions as buttons on your
GlobalViewer Web page, do the following:
4.
Under the IR Port A Group field, click the Add Group
button to add a folder (i.e., group) to the GlobalViewer
Web Group(s) field.
5. Rename the folder according to the function of the device
and/or any name that allows you to easily recognize the
device. In this case, use the name "DVD_VCR".
6 . Under the IR Driver Function(s) field, select the desired
functions (e.g., Power or Menu).
7 . Use the small green arrows between the two fields to
populate the DVD_VCR folder with the functions you
require. You can also drag and drop them into the folder.
Notice that the Port A IR icon is renamed to match the
name of the added device.
Step 6: Configure the Front Panel Buttons
Once the device drivers are added, you can configure the
System 5 IP's front panel buttons. For this exercise, you will
configure Input and On/Off buttons. Additionally, you can
modify a button caption, add a tool tip, set repeat rates, and
select button modes.
N You can customize any front panel button (DVD, VCR,
On/Off, etc.) on a System 5 IP, but most are shipped with
the most common operations labeled for you.
Front Panel window with configured buttons
Configurng an nput button
Input buttons on the System 5 IP include the following, grouped
together on the System 5 front panel: PC, Doc Cam, VCR, DVD,
and Laptop.
N The steps in the following example require using a serial
port driver.
To configure the DVD button to switch to a DVD player when
pressed, do the following:
1
. Select the Front Panel tab.
2 . Choose the green DVD input button.
3. Notice that the default in Line 1 (a caption field) reads
DVD . You can change this to a different name, if desired,
and set the tool tip, repeat rate, and button mode, if
applicable.
4 . In the Button Operations area, select the Driver tab
and expand the tree under the Epson PowerLite 7700p
projector icon. A list of possible projector operations
appears.
5. Expand the Input Control folder to view the input control
options.