Installation, 1 hardware installation, Ardware – IPX DDK-1700 User Manual
Page 11: Nstallation
2. INSTALLATION
Follow the instructions and the diagram below to set up the system.
NOTE: The DDK-1700’s Video Out connector can be connected to a monitor via RCA
connection. When connected you will see information on the monitor screen,
including the DDK-1700’s factory default IP address (192.168.1.168). The DDK-1700’s
IP address will only appear if there is a connection between the DDK-1700 and
another device.
2.1 Hardware Installation
1.
If using external power, connect power adapter to DDK-1700.
2.
Connect network cable to DDK-1700’s RJ45 connection.
3.
Confirm the correct network connection status.
4.
Enter DDK-1700’s IP address into your browser.
NOTE: The red light power indicator of the DDK-1700 flashes when the power supply is on.
Two-color network indicator:
1. Indicator is off when the network is disconnected.
2. The green light illuminates when the network is connected. The flashing orange light
flashes indicates network connection.
11