IPX DDK-1700 - Manual (Page 6)

1. DESCRIPTION
1.1 PHYSICAL DESCRIPTION
-- Front Panel -- -- Rear Panel --
1
3
2
1/4＂-20UNC
1. Light Sensor:
Senses the a of light in the camera’s environment and controls the iris shutter
accordingly.
2. MICROPHONE: Built in microphone.
3. POWER indicator:
Indicates the power status of the unit.
4. Power Input: DC 12V input connects to an external power supply.
5. Power Input:
AC 24V input connects to an external power supply.
6. ETHERNET 10/100 Connector: Standard RJ-45 connector for 10/100 Mbps Ethernet
networks including PoE (Power over Ethernet) function.
7. RESET:
Reset to factory default. (Refer to section 1.2 The Reset Button.)
8. VIDEO OUT Connector: Connector provides composite video output.
9. USB port:
Connects DDK-1700 to a USB port on a computer.
10. LED indicator: The green light indicates the unit is activating and the SD card cannot be
removed.
11. AUDIO IN:
Connector is used to connect the audio output from other devices to the
DDK-1700.
12. SD/ SDHC CARD slot:
Used for updating system software and archiving video.
13. GPIO: 6-PIN connector including the ALARM IN/OUT, RS-485, DC OUTPUT and GROUND
for connecting with external devices.
14. AUDIO OUT: Provides audio output to an external device.
6