IPX DDK-1700 User Manual
Page 67
Event:
Click the Add button in the Event area to enter the “Event” settings page.
1.
Enter an Event name. Check the “Enable this event” box to activate this function. Then set
the Priority and the Source from the drop-down list.
"Priority":
The event with higher priority will be executed first.
2.
Select the event trigger mode.
"Video motion detection":
Motion triggered events.
"Periodic":
An event is triggered in specified intervals. The unit of trigger interval is 1
minute.
"Digital input":
An event is triggered when the DI status is changed by an external device.
"System boot":
An event is triggered when the system boots up.
"Network Loss":
An event is triggered when the network disconnects.
3.
Set the recording schedule time.
4.
Sets the D/O Event Trigger. Check to trigger digital output for number of specified seconds
67