IPX DDK-1700 - Manual (Page 98)

APPENDIX 1. –How to run DDK-1700 UPnP
The DDK-1700
®
supports the UPnP (Universal Plug and Play) protocol which makes it easier for
set-up. Follow these steps for UPnP use:
Figure 1
UPnP Setup Flow Chart
1. Check the IP class of your PC
In most cases Microsoft Windows
®
will assign an IP address of 169.254.*.* automatically with a
subnet mask of 255.255.0.0 if the DHCP server is absent. The default IP address of a
DDK-1700
®
is 192.168.1.168 with a subnet mask of 255.255.255.0. There won’t be any
communication due to different IP class domains and you have to modify the relative settings or
the UPnP protocol won’t work. It may be necessary to check you IP address. Follow this
procedure:
Step 1:
From the Start menu, point to Settings, and then click Control Panel. See Figure 2.
98