IPX DDK-1700 User Manual
Page 38
Changing the Network Settings — Port Detail.
The “Network” page has a “Port Detail” icon at the upper left. This allows you to specify and reserve ports
for both HTTP and RSTP streaming. Follow the steps below to change the Port Detail settings.
1. Click
the
Port Detail
button on the upper left menu to enter the “Port Detail” page.
2.
Enter the “HTTP port” and the “Access name for stream” for the MJPEG streams.
3.
Enter the “HTTPS port”. The default value is 443.
4.
Enter the “RSTP port” and the “Access name for stream” for the MJPEG or JPEG
streams.
5. Click
the
Submit
button to save the new settings.
NOTE: To use an RTSP player to access the DDK-1700, use the following RTSP URL command
to request transmission of the streaming data.
38