SM Pro Audio V-Machines User Manual

Page 64

Advertising
background image

V-­‐Machine  Operating  Manual    

Page  64  of  88  

SM  Pro  Audio

 

 

window)  is  not  yet  licensed,  this  command  will  initiate  the  licensing/authorization  procedure  

as  discussed  in  section  5.5.5.  If  the  plugin  is  already  licensed,  the  VFX  Application  will  alert  you  
to  this  fact,  and  ask  if  you  would  like  to  re-­‐license  it.  Unless  you  have  some  specific  reason  for  
re-­‐licensing,  you  should  avoid  doing  this,  as  it  will  probably  use  up  one  of  a  limited  number  of  

authorizations  provided  by  the  plugin’s  manufacturer.  

5.5.7.5

V-­‐Machine  Menu    

The  Sync...  command  in  the  V-­‐Machine  menu  duplicates  the  function  of  the  SYNC  icon  in  the  
command  bar,  as  explained  in  section  5.6.6  on  page  66.  

The  command  to  Update  V-­‐

 

Machine  firmware  can  be  used  to  check  whether  your  V-­‐Machine’s  

operating  system  is  up  to  date.  Normally,  this  process  will  happen  automatically  if  you  connect  
a  V-­‐Machine  whose  software  is  outdated.  If  the  V-­‐Machine  needs  to  be  updated,  consult  the  
steps  in  section  3.9  on  page  40.  

5.6 V-­‐Machine  Pane  

The  V-­‐Machine  Pane  (see  Figure  31)  is  a  virtual  representation  of  the  real  V-­‐Machine’s  front  
panel.  Clicking  on  any  of  the  eight  keypad  buttons  does  the  same  thing  it  would  on  the  real  
hardware  version.  This  gives  you  an  easy  way  to  configure  and  test  your  Presets.  

You  can  use  the  V-­‐Machine  Pane  to  navigate  the  Banks  and  Presets  in  the  currently  active  

Library,  adjust  parameter  values,  assign  external  MIDI  controllers,  and  enter  Global  System  
Settings.  If  the  Library  you’re  editing  contains  multiple  Banks,  for  instance,  or  if  a  Bank  
contains  multiple  Presets,  you’ll  step  through  the  Banks  and  Presets  using  the  buttons  in  the  V-­‐

Machine  Pane  exactly  as  you  would  on  the  hardware  unit.  The  strip  along  the  top  contains  the  
four  dual-­‐button-­‐press  commands  available  on  the  V-­‐Machine  hardware  (MENU,  SAVE,  LEARN,  
and  PANIC),  plus  two  buttons  (SYNC  and  HELP)  whose  usage  is  explained  later  in  this  chapter.  

In  this  manual,  the  words  MENU,  SAVE,  LEARN,  and  so  on  are  referred  to  as  “icons,”  even  

though  they  aren’t  graphic  icons  in  the  traditional  sense.  They  function  like  buttons,  though  
they  don’t  look  like  buttons  either.  They  may  look  like  menu  headers,  but  they’re  not.    

 

Figure  31  

The  V-­Machine  pane  in  the  VFX  Application.  The  words  in  the  top  row  duplicate  the  dual-­button-­press  functions  of  the  
V-­Machine.  

5.6.1  Standard  Keypad  Browsing  

The  keypads  on  the  V-­‐Machine  Pane  respond  exactly  like  those  on  the  hardware  unit.  Browse  

Advertising